¹ Source: wiktionary.com
Definition of Reamers
1. reamer [n] - See also: reamer
Lexicographical Neighbors of Reamers
Literary usage of Reamers
Below you will find example usage of this term as found in modern and/or classical literature:
1. American Machinists' Handbook and Dictionary of Shop Terms: A Reference Book by Fred Herbert Colvin, Frank Arthur Stanley (1914)
"Cross-section of Hand Reamer Chucking reamers for gray iron and bronze have, ...
In these reamers the blades are circular ground to the exact size of hole ..."
2. American Machinists' Handbook and Dictionary of Shop Terms: A Reference Book by Fred Herbert Colvin, Frank Arthur Stanley (1909)
"Chucking Reamer Blade for Gray Iron and Bronze Chucking reamers for gray ...
In these reamers the blades are circular ground o the exact size of hole to be ..."
3. Modern Shop Practice: A General Reference Work by Howard Monroe Raymond, American Technical Society (1916)
"reamers A reamer is a tool that makes a smooth, accurate hole. In many cases,
however, reamers are used to enlarge cored holes, or Fig. 47. ..."
4. Modern Toolmaking Methods: A Treatise Om Precision Dividing and Locating by Franklin Day Jones (1915)
"Rose Chucking reamers. — These reamers are used for enlarging cored holes ...
The grooves on the cylindrical portion of rose chucking reamers are cut by a ..."
5. Machinery's Encyclopedia: A Work of Reference Covering Practical Mathematics by Erik Oberg, Franklin Day Jones (1917)
"reamers and Reamer Holders. — Holes that are produced simply by drilling are not
... reamers are abo applied in many other ways; some types are intended ..."
6. Text-book of Advanced Machine Work: Prepared for Students in Technical by Robert Henry Smith (1919)
"reamers are used for sizing, smoothing, and standardizing straight and taper holes.
... There are two general classes: chucking or roughing reamers, ..."
7. American Machinist Grinding Book: Modern Machines and Appliances, Methods by Fred Herbert Colvin, Frank Arthur Stanley (1912)
"From the data thus obtained they compiled tables for four styles of reamers, for
obtaining what they considered the best clearances, the object being to ..."
8. Hardening, Tempering, Annealing and Forging of Steel: A Treatise on the by Joseph Vincent Woodworth (1902)
"This can be best accomplished by using two reamers, one for roughing, ...
The teeth on reamers for steel and cast-iron should be on center, while for brass ..."
Other Resources:
